1 2

WM Plastics

WM Plastics Lustre Inks | Shimmering Metallic Finish

WM Plastics Lustre Inks | Shimmering Metallic Finish

$46.50 USD
$46.50 USD
Sale Sold out
Shipping calculated at checkout.
Non-Phthalate Plastisol (Midori Series)

These inks are designed to stand out on garments by providing a unique appearance that will catch

anyone’s eye. Available in an array of colors and contains great opacity to cover the dark garments.
    Bleed Resistance: None
    Opacity: High

    Storage: Ideally 65 to 80 F. Keep out of direct sunlight.
    Mesh: 86

    Stencil: Any direct emulsion or capillary film.
    Wet on Wet Printing: Can be printed wet-on-wet to increase production.
    Modifications: To reduce viscosity use Curable Reducer (I10-9906), improve stretch use G&S Base (I10-1020), puff use Puff Additive (I10-9903), extend color use Soft-hand Base (I10-0111) & for suede puff or dulling use Suede Additive (I10-9907).
    Squeegee Hardness & Angle: Medium to hard at a 45 degree angle.
    Fusion/Curing:325 F/163 C for 1 to 1 ½ minutes. Oven temperature can be increased and dwell time decreased. For heat presses use 390 F/195 C for 8 seconds. Because metallics and lustres reflect it may be necessary to increase temperature and dwell time.
    Wash-up: Any plastisol cleaner.

     

    Special Notes: PVC inks are thermoplastic compounds that require heat to fuse or cure. If ink rubs off on a white cloth or cracks, temperature and/or dwell time should be increased. Do not dry clean and always test on fabric to be printed.

    View full details